1.8 I-Ton Amini Excavator | I-crawler hydraulic bigger

Ikhaya> Iimveliso > I-Dibi-Inja yomatshini > Amaziko e-Mini

I-DIG

Imodeli:De18
Ubunzima bomsebenzi:I-1800kg
Injini:I-Ibiong / Kubota / Yanmar
Uqwalaselo oluqhelekileyo:I-3-cylinder injini yokuphumla yamanzi, ecaleni kwe-boom, i-wing, i-4 i-4 intsika ye-pillar fops. Umsebenzi we-hydraulic pilot, i-chassis hydraulic. I-spare tubraulic tubeng.

DIBANA NO

I-DG18 I-Mini Excavatator enesakhiwo esincinci se-wing kunye nenketho ye-boom-shift-shift-shift, enokusetyenziselwa umsebenzi omxinwa

Ukujikeleza okungahambiyo, i-chassis yokubuyisa, isimo esikhutshiweyo, i-Pilot yokuqala yenkqubo, i-injini yokungeniswa kwerabha, i-injini yoKhuseleko lweRhafu, uMgangatho wokuLawulwa kweRhafu, i-Injini yoKhuseleko lweRhafu, i-Euro 5) inokuxhotyiswa ngendawo efanelekileyo yomsebenzi.

Inkcazo ye-DG18

Malunga nobunzima

Uza kuyihambisa njani umqala wakho? Qiniseka ukuba ayinzima kakhulu ekuseto oceba ukuyisebenzisa. Ngaphandle koko, uya kubangela ingxaki yakho kwisithuthi sakho sokutsalwa, okanye awuyi kuba nakho ukuhambisa umkhuseli kwaphela.

I-parameters iyonke ye-DG18

Malunga nobukhulu:

Onke amacandelo amancinci ama-mini ancinanana kubafakeli apheleleyo, kodwa kukho ubungakanani obahlukileyo kudidi lwe-mini. Abanye basenokuba bakhulu kakhulu emsebenzini wakho, kanti abanye bancinci kakhulu.

Ukufumanisa ubungakanani be-Excavarenti oyifunayo, kuya kufuneka uvavanye umsebenzi wakho. Umbungu kufuneka akwazi ukulingana kwindawo ekufuneka isebenze. Oku kuthetha ukuba kufuneka ikwazi ukuqhuba ngokuchanekileyo, kungabi njalo.

Xa ujonge ubukhulu, qwalasela ukuphakama, ububanzi, kunye nobude. Ngaphandle koko, unokuphela ngobukhulu obungasebenzi.

Imodeli yomatshini Hayi.		Dg18
Uhlobo lweendlela		Umkhondo werabha
Umatshiniubunzima		I-3968lbs / 1800kg
Umthamo webhakethi		I-0.06m³
Uxinzelelo lwenkqubo		I-18MPA
UMax. amandla ebanga		35⁰
I-max.buct yetha amandla		I-14kn
I-max.armm imba amandla		10kn
Uhlobo lokuSebenza		Ulawulo lwe-joystick
Injini	Imodeli	I-deong 3e25
	Ukufuduswa	1.532l
	Uhlobo	I-3-cylinder disel
	UMax. Amandla	18.4kw/ 2350r / min
	UMax. Itota	I-92.5N.m
Kuko konkeUbukhulu	Ubude bonke	I-3865mm
	Ububanzi bonke	I-1050mm
	Ukuphakama ngokubanzi	2270mm
	Ububanzi be-chassis	I-1050mm
	Imiz. Ukucocwa komhlaba	210mm
	Ikhabiti ukuphakama	2270mm
	Isiseko se-AXLE	I-1230mm
Blade	Ububanzi	I-1050mm
	Ukuphakama	I-235mm
	UMax.Lift ye-dozer blade	230mm
	UMax.depth ye-dozer blade	I-275mm
Inkqubo ye-hydraulic	Uhlobo lwempompo	Impompo yegiya
	Umthamo wePump	I-52.8l / min
Amandla etyiwa	Inkqubo ye-hydraulic	17l
	Itanki lamafutha	I-19
Imoto	Ukuhamba ngeemoto	I-Eaton Omb-160
	Swing motor	I-Eaton SW2.5k-245

Malunga nobude bengalo

Amaqela ahlukeneyo e-Execavavava aza neengalo ezahlukeneyo. Kuba ingalo yenye yezona ndawo zibalulekileyo zomdala, qinisekisa ukuba iyakusebenzela into oyifunayo.

Qwalasela iprojekthi yakho kunye nekhokwe. Ngaba iqhinga lengalo eliqhelekileyo? Ukuba akunjalo, fumana ubungakanani obusebenzela kuwe.

Iingalo ze-Excavatator ziyafumaneka ngobude kunye nobukhulu obuphilayo. Oku kuvumela ixesha elide ukufikelela kunye nokuphakama okuphezulu.

Ayizukukwenza okuhle ukuba umgcini wakho awukwazi ukufikelela kwisikhongozelo ekufanele ukuba silahle izinto, ke ngoko qiniseka ukuba zingubukhulu obufanelekileyo.

Uluhlu lokusebenza	I-max.digung ukuphakama	3I-365mm
	I-max.dume ukuphakama	2385mm
	I-max.digung ubunzulu	2050mm
	I-max.verver ye-on	I-1725mm
	I-max.digung radius	I-3860mm
	Imizuzu ye-radius	1720mm
	Umsila wing radius	I-1125mm
Inkqubo yeSwing	Boomsiphikoant(Khohlo/Kunene)	75⁰/ 45⁰
	Isantya seSwing	I-10 ~ 12rmP